-
Well site completion and servicing safety covering task hazards, energy and pressure awareness, lifting controls, chemical exposure basics, traffic management, and emergency response. -
Well inspection safety basics covering site hazards, safe access, equipment awareness, isolation practices, vehicle separation, and reporting to support safer inspection activities.
-
Offshore oil and gas safety essentials covering permit-to-work mindset, hazard awareness, lifting and dropped-object controls, isolation awareness, emergency response, and safe behaviors offshore.
-
Scaffold erection and inspection: base setup, bracing, access, guardrails, load limits, and daily checks to help competent persons prevent falls and instability.
-
Construction fall protection essentials covering leading fall hazards, guardrails, personal fall arrest basics, ladder/scaffold awareness, and planning and supervision practices to reduce falls from height.
-
Hand and power tool safety: correct tool selection, inspection, guarding, safe handling, maintenance, and PPE to reduce cuts, flying debris injuries, and shock risks.
-
Worksite safety for construction crews covering common site hazards, access control, traffic and pedestrian separation, housekeeping, tool safety, and reporting for safer daily operations.
-
Heavy equipment safety covering pre-use checks, safe operating zones, spotter communication, blind-spot awareness, ground conditions, and maintenance isolation to prevent struck?by and rollover incidents.
-
Demolition safety training covering pre-job surveys, structural stability, utility isolation, debris handling, equipment hazards, dust controls, and exclusion zones to reduce collapse and struck?by risks.
-
Oil and gas hazard awareness covering common field risks, isolation awareness, lifting and vehicle hazards, exposure controls, and emergency response basics for safer operations.
-
Well site preparation and drilling safety covering high-risk task awareness, equipment hazards, dropped-object prevention, isolation concepts, traffic control, and emergency response basics.
-
Trenching and excavation safety: soil assessment, protective systems (sloping/shoring/shielding), access/egress, utility hazard controls, inspections, and emergency response to prevent cave?ins.
-
Scaffold program administration: competent person duties, inspection routines, tagging systems, training requirements, and corrective action tracking to reduce falls and scaffold failures.
-
Silica dust control for construction: task-based risk recognition, wet methods and dust extraction, housekeeping, and respiratory protection awareness to reduce respirable crystalline silica exposure.
-
Asbestos awareness and control training covering health risks, where asbestos may be found, recognition and reporting, exposure prevention, and safe work practices to avoid disturbing ACMs.
-
Lead safety (Construction) covering health effects, exposure routes, high-risk tasks, engineering controls, hygiene practices, PPE/respiratory awareness, and program elements to reduce exposure and support compliance.
-
Lead safety (Shipyards) covering health effects, exposure routes, high-risk tasks, engineering controls, hygiene practices, PPE/respiratory awareness, and program elements to reduce exposure and support compliance.
-
Ergonomics program administration: risk screening, task/workstation assessments, control planning, training, and evaluation to reduce musculoskeletal disorders and improve comfort.
-
Workplace stress risk management covering psychosocial hazards, workload and role clarity, supportive supervision, practical interventions, and monitoring to protect wellbeing at work.
-
Steel erection safety training covering fall protection, rigging and hoisting awareness, column stability, decking practices, and coordination to control high?risk structural steel activities.
-
Cranes and derricks safety: planning, setup, inspection, load charts, signaling, and worksite controls to reduce overturning, power-line contact, and dropped-load hazards.
-
Build a construction safety management system: policy, planning, roles, risk controls, audits, performance metrics, and continuous improvement for consistent site safety outcomes.
-
Practical training on Health Hazards in Construction Training covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Machine safeguarding and guarding essentials: identify hazards, choose guarding methods, set safe distances, perform inspections, and apply energy-isolation awareness to prevent entanglement, crush, and cut injuries.
-
PSM fundamentals covering process hazard analysis basics, procedures, management of change, training, mechanical integrity, contractor controls, incident learning, and emergency preparedness to prevent major events.
-
Hot work safety for welding, cutting, and brazing: permits, fire watch, cylinder handling, fume controls, ventilation, and PPE to prevent burns, fires, and exposures.
-
Industrial hygiene fundamentals: recognize and evaluate exposures (chemical, physical, biological) and apply control strategies, with an introduction to basic monitoring concepts and exposure prevention.
-
Hearing conservation program administration: exposure assessment, control options, hearing protection selection, training, audiometry coordination, and records to prevent noise?induced hearing loss.
-
Bloodborne pathogens program administration: exposure control planning, training and documentation, device/work practice controls, incident response workflows, and continuous improvement to reduce infection risk.
-
Respiratory protection program essentials: hazard evaluation, respirator selection, fit testing and maintenance basics, training requirements, and program checks to ensure protection against airborne exposures.
-
Safety management fundamentals covering policy, planning, hazard/risk controls, training, inspections, incident learning, and continuous improvement for a practical safety program.
-
PPE selection, fit, use, and maintenance: hazard assessment, limitations, inspection routines, cleaning, storage, and replacement criteria so PPE performs reliably when needed.
-
Manage an energy control (LOTO) program: written procedures, training and authorization, inspections, contractor coordination, device control, and records to prevent unexpected energization.
-
Ergonomics fundamentals covering MSD risk factors, task/workstation design, safe manual handling, and practical controls to reduce discomfort and injury risk.
-
Administer a forklift safety program: authorization and refresher training, inspection and maintenance controls, site rules, incident learning, and records management to reduce truck-related risks.
-
Safe patient handling fundamentals covering risk assessment, transfer aids, teamwork, communication, and injury prevention strategies to reduce caregiver strain and improve patient safety.
-
EMS fundamentals covering aspects and impacts, requirements, objectives, operational controls, audits, and continual improvement to manage environmental risk and performance.
-
Construction safety management fundamentals: leadership duties, permits, supervision, contractor coordination, and inspections to control high?risk activities and reduce incidents.
-
How to conduct a JHA: break tasks into steps, identify hazards, select controls, document safe procedures, and review for change?improving consistency and reducing incidents.
-
Develop a fall protection program: hazard assessment, system selection, anchor planning, equipment inspection, training needs, rescue planning, and routine audits for work?at?height tasks.
-
Evaluate a safety management system using audits, indicators, document reviews, and workforce feedback to identify gaps and prioritize improvements in risk control and compliance.
-
Create an Emergency Action Plan (EAP): alarms, evacuation routes, assembly points, roles, communications, drills, and review steps to ensure fast, organized response.
-
Practical training on Fire Prevention Plan Development & Implementation covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Safety management fundamentals covering policy, planning, hazard/risk controls, training, inspections, incident learning, and continuous improvement for a practical safety program.
-
Workplace violence prevention covering risk factors, warning signs, de-escalation basics, reporting and response procedures, and support after incidents to help keep staff and visitors safer.
-
Forklift competent person prep covering evaluation criteria, inspection expectations, hazard recognition, and training oversight responsibilities for consistent, safer powered industrial truck operations.
-
Ergonomic injury prevention covering risk factors, safe lifting, posture and task design, micro-breaks, and practical controls to reduce strains and repetitive injuries.
-
Prevent slips, trips, and falls through housekeeping, surface condition controls, spill response, lighting, footwear, and safe ladder and stair practices supported by simple inspections.
-
COVID?19 workplace preparedness covering exposure reduction measures, hygiene and cleaning practices, ventilation awareness, response planning, and communication steps to support safer operations during outbreaks.
-
Employee heat illness prevention covering hydration, acclimatization, early symptom recognition, safe work practices, and escalation steps for hot-weather work.
-
Supervisor heat illness prevention covering acclimatization, work/rest planning, hydration strategy, symptom recognition, monitoring, and emergency response to prevent heat-related incidents.
-
Supervisor safety leadership skills: coaching, briefings, inspections, risk management, incident response, and reinforcing accountability to improve safe performance across teams.
-
Workplace privacy and data protection covering lawful handling, confidentiality, secure storage and sharing, breach awareness, and practical habits that reduce data risk in daily work.
-
Sonography safety covering ergonomic risk reduction, infection control basics, equipment checks, and patient interaction considerations to reduce strain and improve safe practice.
-
Workplace emergency preparedness: scenario planning, communications, evacuation/shelter procedures, first?response roles, drills, and post?incident review to improve response and recovery.
-
Pharmacy safety covering medication handling risks, hazardous drug awareness, spill response basics, PPE and hygiene practices, and reporting to support safer dispensing and compounding.
-
Surgical suite safety covering infection prevention behaviors, sharps and instrument controls, chemical awareness, ergonomics, and emergency readiness for safe, reliable surgical operations.
-
Emergency room safety covering violence risk reduction, exposure and sharps controls, safe patient handling, and rapid reporting to support safer care in fast-paced clinical settings.
-
Build a HazCom program: chemical inventory, labeling, SDS management, exposure controls, employee training, and periodic audits so workers understand chemical hazards and safe handling.
-
Manage stress and violence risks by identifying triggers, improving reporting and response, applying de-escalation and support practices, and strengthening policies for safer workplaces.
-
Lead safety (General industry) covering health effects, exposure routes, high-risk tasks, engineering controls, hygiene practices, PPE/respiratory awareness, and program elements to reduce exposure and support compliance.
-
Bloodborne pathogens training covering exposure risks, standard precautions, PPE, sharps handling, cleanup, and post-exposure actions to reduce infection risk in healthcare and similar settings.
-
Safety management fundamentals covering policy, planning, hazard/risk controls, training, inspections, incident learning, and continuous improvement for a practical safety program.
-
Run an effective safety committee: clear roles, meeting structure, inspections, hazard reporting, action tracking, and communication practices that turn issues into sustained improvements.
-
Advanced incident investigation: evidence collection, interview skills, human factors, causal analysis, and corrective action validation to prevent recurrence and strengthen learning.
-
Hazard analysis and control training: identify hazards, assess risk, choose controls using the hierarchy of controls, and verify effectiveness through inspections and feedback.
-
Sharps safety training covering safer devices, needle handling and disposal, work practice controls, cleanup basics, and post-exposure response to reduce needlestick injuries.
-
Ethylene oxide safety covering health risks, exposure routes, safe handling and storage, ventilation awareness, spill response, and prevention practices for sterilization environments.
-
Radiation safety training covering basic concepts, exposure routes, time?distance?shielding controls, signage and access controls, and safe handling practices to reduce exposure risk.
-
Asbestos awareness and control training covering health risks, where asbestos may be found, recognition and reporting, exposure prevention, and safe work practices to avoid disturbing ACMs.
-
Practical training on Occupational Safety and Health Fundamentals covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Practical training on Occupational Safety and Health Core Essentials covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Electrical safety essentials: hazard awareness, safe planning, isolation principles, inspection routines, and PPE basics to reduce risk of shock, burns, and arc incidents.
-
PPE selection, fit, use, and maintenance: hazard assessment, limitations, inspection routines, cleaning, storage, and replacement criteria so PPE performs reliably when needed.
-
Common hospital hazards fundamentals covering slips/trips, sharps, infection risks, chemicals, ergonomics, and violence?plus practical controls and reporting steps for safer healthcare environments.
-
Hospital heliport safety covering access control, safe approach routes, communications, rotor wash hazards, and emergency procedures to reduce risks during helicopter operations.
-
Practical training on Electrical Hazards & Controls Training covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Practical training on Managing Safety & Health - General Industry Essentials covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Heat and cold stress safety covering risk factors, early warning signs, protective measures, work planning, and emergency response for temperature extremes.
-
Practical training on Stairway & Ladder Safety Training covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Scaffold safety training covering safe access, platform integrity, guardrails, load limits, and inspection checks to reduce fall risks and structural instability.
-
Confined space entry safety: permits, hazard identification, atmospheric testing, ventilation, isolation, attendant duties, communications, and rescue planning to prevent asphyxiation and toxic exposure.
-
Employee HazCom training on labels and pictograms, SDS use, exposure routes, safe handling and storage, spill response basics, and reporting to prevent chemical injuries and illness.
-
Nail gun safety covering trigger types, safe handling, positioning, material checks, PPE, and housekeeping to prevent puncture injuries and unintended discharge incidents.
-
Work zone traffic safety: traffic control plans, signage, worker visibility, vehicle?pedestrian separation, spotter practices, and response steps to reduce struck?by and intrusion risks.
-
Practical training on Protective & Lifesaving Equipment Training covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Glutaraldehyde safety covering health effects, safe use and ventilation, PPE, spill response, storage and disposal basics, and reporting to reduce exposure during disinfection tasks.
-
Mercury safety training covering exposure risks, spill prevention and response, safe cleanup practices, storage and disposal basics, and reporting to reduce mercury-related health risks.
-
Fire safety basics covering ignition sources, prevention controls, alarms and evacuation, extinguisher awareness, and housekeeping and inspection routines that reduce the likelihood and impact of workplace fires.
-
Biological hazards training covering exposure sources, prevention controls, hygiene practices, PPE basics, and response steps to reduce infection and illness risks at work.
-
Practical training on Managing Safety & Health - Construction Essentials covering key hazards, safe work practices, and control measures, with simple checklists and reporting steps to help prevent incidents and improve safety performance.
-
Material handling safety covering lifting and carrying techniques, mechanical aids, load stability, storage practices, and ergonomic controls to reduce strains, crush hazards, and struck-by incidents.
-
Lockout/Tagout training covering energy isolation, shutdown and verification steps, servicing practices, group lockout basics, and common errors that lead to unexpected start?up injuries.
-
Crane and rigging essentials: lift planning, rigging selection and inspection, load control, signals and communication, and exclusion zones to prevent dropped loads and contact incidents.
-
Noise and hearing protection training covering exposure awareness, control strategies, and correct selection and use of hearing protection to prevent hearing loss.
-
Latex allergy training covering sources of exposure, symptoms and response, substitution options, and safe work practices to prevent allergic reactions in latex-use environments.
